Products
GAMMA 160
The GAMMA 160 is a manual mirror welding machine, suitable for welding pressure piping systems for water, gas, or other media. The machine has a range of 40 to 160 mm. With this machine you can produce bends yourself. Of course, it can also weld injection molded fittings. Short collars are welded with the help of a special collar holder (on request). The machine is very compact and easy to transport.
The machine contains:
- A machine carriage with frame, 2 double clamps and a manual pressure regulator.
- Steel sliding clamps with quick-release system
- A welding mirror with electronic temperature controller
- A flat plane to straighten the ends of the pipe/fitting. This contains a safety micro-switch.
- A holder for planer and welding mirror
- Steel inserts Ø40 to 140mm, in a transport case
MACHINES
| 92250550 | GAMMA 160 (230V – 1~) with Inserts Ø 40 – 140mm |
Datasheets:
Categories
Technical Data
Options
Spare Parts
Technical Data
| GAMMA 160 | ||
| Diameter range | Ø | (32) 40 – 160 mm |
| SDR-bereik | SDR | SDR 41 – 6 |
| Materials | HDPE, PP, PVDF | |
| Power supply | 230V Single Phase | |
| Total power consumption | W | 1600 W |
| Recommended generator | 3,5 / 4 kVA | |
| Instelbereik temperatuur | °C | 180°C / 280°C |
| Omgevingstemperatuur | °C | -5°C / 40°C |
| Tijd nodig om lastemperatuur te bereiken | ||
| Geluidsniveau | Lwa | 79,2 dB (A) |
| Geheugen | – | |
| Vooraf instelbare lascycli | – | |
| Wi-Fi ready | – | |
| GPS | – | |
| Spiegeltemperatuur | Instelbaar | |
| Spiegeltemperatuur afleesbaar | – | |
| Automatische extractie lasspiegel | – | |
| Automatische extractie vlakschaaf | – | |
| Smartlock inserts | – | |
| Hijssteun klemmen-lasspiegel-vlakschaaf | – | |
| Afmetingen machine-basis | L x B x H | 610 x 300 x 470 mm |
| Afmetingen stuurkast | L x B x H | – |
| Gewicht machine-basis | kg | 25 kg |
| Gewicht stuurkast | kg | – |
| Gewicht vlakschaaf | kg | 7,5 kg |
| Gewicht lasspiegel | kg | 3,5 kg |
| Gewicht houder | kg | 5 kg |
| Gewicht standaard samenstelling | kg | 85,5 kg |
Options
| 87291350 | Inserts Ø 32mm |
| 85232252 | THIN Single Clamp |
| 80402251 | Tool for Flange Necks |
Spare Parts
| 90004636 | Heating plate ( 230V ) |
| 87291626 | Inserts Ø 40mm |
| 87291897 | Inserts Ø 50mm |
| 87292441 | Inserts Ø 63mm |
| 87292712 | Inserts Ø 75mm |
| 87292984 | Inserts Ø 90mm |
| 87293257 | Inserts Ø 110mm |
| 87293522 | Inserts Ø 125mm |
| 87293791 | Inserts Ø 140mm |
| 83122250 | Milling Cutter ( 230V ) |
| 84463300 | SET of Blades for Milling Cutter ( 2pcs) |
English 
Nederlands (België) 
Français de Belgique